How to Get a New Motorcycle Key
It can be extremely frustrating and terrifying to lose the key to your motorcycle. If it's your only ride, it can cause you to be without transportation for a few weeks.
Luckily, you can usually find a new key to your motorcycle using the ignition code for the cylinder. However, you'll have to take your motorcycle's cylinder to a locksmith to get it.
Lost Key
You can't drive a motorcycle without a key, and it's certainly not enjoyable to lose it. It can be particularly frustrating for riders who are trying to get their bike to a location quickly and are required to start their bike.
To ensure your keys are secure, you should use a key ring, which won't break or fall apart. If you're traveling for long distances, ensure you have a carabiner or something similar, so that you can connect them to the belt loops on your pants.
If you have difficulty finding your keys look them up between your cushions on your sofa at home or under your laundry basket. If you're at work or at work, search your desk or your locker.
When you find your key, make a note of it and take a clear photograph of the code on your phone , so you can give it to your local locksmith. The code will be needed by the locksmith to create the new bike key.
Many manufacturers will give you an access code for your key when you purchase a bike. The code is either on the key or on a metal tab attached to the key. It should be a four-digit number. duplicate motorcycle keys will help you locate the ignition cylinder. It is located between your speedometer, tachometer, and silver shaft.
Additionally, the majority of bikes are equipped with transponders that are electronically programmed to the ignition system. This means that even a duplicate key will not cause your bike to start.
Many of these vehicles will require new transponder key to be programmed. This can be costly and time-consuming. The best method to avoid this issue is to keep a spare.
Another option is to go to a dealer and have them create a new fob for you. This is quicker and cheaper than replacing an old metal key, but it's still an expensive experience.
If your motorcycle has a keyless ignition, you can have the dealer program a new key for you based on your VIN number. This will help you save time and reduce your insurance costs. You won't pay any towing costs.
Broken Key
If you've lost your motorcycle key, you want to have it replaced as quickly as you can. A locksmith is the quickest method of obtaining a replacement key. A locksmith will be able to remove the damaged keys, and extract the code from the ignition of your motorcycle and replace it with a fresh one.
A damaged key can be a very difficult circumstance, but you shouldn't be in panic mode. A locksmith can swiftly and cost-effectively fix your issue and you will be back on the road in whatever time it takes.
First, you need to examine the lock and determine if it is able to be taken out. Pin tumbler locks often come with a plug that needs to be rotated to the key pull position in order to open. It is important to position the plug correctly or the key will be trapped and will be more difficult to remove.
If the key is stuck inside the lock and you are unable to remove it, explore a variety of ways to extract it. Some of these methods require oil, while others require pliers or another item that is more gripping.
To start with you can use a paper clip to gently pull out the key. This is a good option for thinner paper clips as they provide a much stronger grip on the key. You can also use a tampon or other similar object to place inside the lock to grip the key from the bottom.
Another option is to find the screw that is small and twist it into the broken part of the key. This will force the key's broken section to the outside so that you can push it outward.
You could also make use of a small jig saw to cut the broken portion of the key out of the lock. This works for me every time.
Fast Keys Locksmith is the best locksmith for replacing your motorcycle keys . We are experts in mobile key repair and replacement for motorcycles. Within 30 minutes of receiving your call, we can be at your place.
Ignition Cylinder Code
If your motorcycle key doesn't fit in the ignition cylinder to start your bike, look closely for signs of blockages. This could be due to dirt and corrosion that block the keyway. If you observe any obvious problems it is possible that a locksmith will be able to assist you resolve the problem.
The cylinder's keyway needs to be lubricated to stop a motorcycle key from sticking in the ignition. To ensure that your key slides into your ignition, locksmiths suggest graphite or silicon powder lubrication. However, they caution against using WD40 or oil-based lubricants for the key path as they attract dirt and grime which can cause further obstruction to your keyway.
Another reason that a motorcycle key won't fit in the ignition is that it's damaged or worn out. This happens over time, particularly when you use your motorcycle often.
If this happens it's a good idea to get a new key made by an experienced locksmith. Locksmiths have the skills and knowledge to create a new key from an ignition cylinder.
It is recommended to call an expert locksmith before you go and clarify the situation. You'll require the entire ignition cylinder along. It is recommended to call ahead and ask whether they're capable of dismantling it and make you keys from it.
Certain locksmiths are able to do this, but some may not. To find the right locksmith, you'll need to do some research.
It's important to know that this option isn't ideal for those who don't have the time to wait for a new key from your dealer. It's also more expensive than other options.
Try checking the key cylinder on your motorcycle using an LED to see whether it's not turning on. You'll want to check for corrosion and dirt as well as metal shavings or debris that might be in the keyway.
A lot of motorcycles from the past do not have keys. You can provide the code to locksmiths in order to get a new key. The cylinder code is usually three or four digits that's printed on the cylinder for the ignition switch or affixed to the tabs of the key made of metal.
Unrecognizable code
Key codes are usually included with new motorcycles. This key code is usually on an aluminum tab that is attached to the chain. This is a great spot to keep the key code close in the event that you lose it. It is also used by locksmiths to make a new key.
Certain motorcycles, like Harley-Davidsons, use onboard diagnostics to communicate with their owners in the event of issues. The codes on the dash indicate which fault code has to be fixed. They can also help in identifying the troublesome code that can be resolved using an instrument for diagnosing.
However, some motorcycles do not have these codes. This is because they were made when the bike wasn't sold with a key code, or because the code was printed on the lock and has been corroded over time.
This isn't a huge issue however it can be a hassle. This can be avoided by placing your keys in a safe place and instructing others not to take them.
The other option is to get an locksmith to cut you an entirely new key. Your local locksmith should have a lookup table that they can utilize to find the key code and the cylinder code of your motorcycle. This is the fastest and most cost-effective way to replace your key.
To do this, remove the cylinder of your ignition and bring it to the locksmith. They will then be able to determine where the cuts and files have to be made in order to create a new key that fits your motorcycle.
You can also try to read the code of your cylinder by taking your ignition key out of the cylinder, then loosening it a bit. Most bikes have a three or four-digit code on the side of the cylinder. This code is accessible, but you might need to turn or loosen the cylinder to see it.
We are available to help you with any queries or repairs. We provide a range of services, such as lock-and-key services, with affordable rates.